Created with Sketch. Created with Sketch.

Shop by Category

Induction Solutions

  • Fuel Solenoid Coil

    This is a replacement fuel solenoid coil for Small Body .156 Fuel Solenoids(PN 19715) it will also fit these common solenoids; Edelbrock: 72050 Wilson: 371957 SpeedTech: 101-157 This coil...

  • Tubing Bender

    This is the same tubing bender used at I-S. Each tool bends one size. Open side type which slips over tube at any point. Makes smooth tight radius bends up to 180 degrees with minimum effort. No...

  • -6 Nitrous Line Upgrade Kit

    This is a great addition to anyone’s nitrous kit that may have came with a -4 line set up. Most kits sold with a -4 line are limited to around 250 HP. Going to this I-S upgrade line kit will...

  • NPT 45

    1/8 NPT 45° Fitting

    This is an 1/8 to 1/8 NPT 45° fitting. It will thread into any I-S, as well as, most other manufacturers solenoid outlets. These fittings are made of steel with a nickel plating that is very...

  • NPT 90

    1/8 NPT 90° Fitting

    This is an 1/8 NPT to 1/8 NPT 90° Fitting. It will thread into any I-S, as well as, most other manufacturers solenoid outlets. These fitting are made of steel with a nickel plating that is very...

  • 1/8" NPT

    1/8 NPT Nipple Fitting

    This is an 1/8 NPT to 1/8 NPT Nipple Fitting. It will thread into any I-S, as well as, most other manufacturers solenoid outlets. These fitting are made of brass with a nickel plating...

  • 10 lb Max Flow Bottle Valve

    10 lb Max Flow Bottle Valve I-S bottle valves are top of the line! Their bottle valves are a true “high-flow” valve, with a large 1/2 inch siphon tube with a flare to encourage great...

  • 15lb Max Flow Bottle Valve

    10 lb Max Flow Bottle Valve I-S bottle valves are top of the line! Their bottle valves are a true “high-flow” valve, with a large 1/2 inch siphon tube with a flare to encourage great...

  • 2.5 Inch Liquid Filled Gauge

    I-S gauges are very high quality gauges with very precise tolerances. These high pressure gauges will read consistently from 0-1500 PSI time and time again. They are constructed of a very clean...

  • 3 Stage Distribution Log

    3 Stage Distribution Log Dist Tree W/ a 3/8 NPT inlet and six 1/4 NPT outlets as well as a 1/8 NPT port for a purge, gauge, or even a pressure transducer. Comes W/ fittings. Some items may be...

  • 4cyl Complete Kit

    4 Cylinder Complete Plumb Kit

    I-S 4 Cylinder Plumb Kit are the best on the market, their kits are the closest thing to a true complete kit. The standard plumb kit includes everything to completely plumb the manifold and...

  • 4cyl Plumb Kit

    4 Cylinder Plumb Kit

    The I-S 4 Cylinder Plumb Kit is the best on the market, their kits are the closest thing to a true complete kit. The I-S standard plumb kit includes everything to completely plumb the...