Created with Sketch. Created with Sketch.

Shop by Category

Solenoids

  • Fuel Solenoid Coil

    This is a replacement fuel solenoid coil for Small Body .156 Fuel Solenoids(PN 19715) it will also fit these common solenoids; Edelbrock: 72050 Wilson: 371957 SpeedTech: 101-157 This coil may also fit other solenoids not listed. Average amp...

  • Fuel Solenoid (.156)

    This is the I-S small body fuel solenoid, they use this solenoid in all traditional direct port systems. This solenoid has a Viton plunger, a very low-amp coil, 1/8 NPT inlet/outlet, and a .156 orifice. The difference between this solenoid and...

  • Fuel Solenoids: I-S Bottom Exit (.178)

    Bottom exit fuel solenoids are the highest flowing gasoline/e85 solenoid I-S offers. At a quick glance these solenoids look like a “cheater style” fuel solenoid. But, upon closer inspection you will notice these solenoids have a...

  • High Amp Nitrous Solenoid Coil

    This is a replacement high amp nitrous solenoid coil for .125 bottom exit (PN 19718-125) nitrous solenoids, it will also fit these common solenoids; Wilson: 372105 and 372115 NS: 26070 SpeedTech: 102-115 This coil may also fit other solenoids...

  • Light Weight Solenoids – Trash Can (.177)

    Induction Solutions has the finest Light Weight Solenoids in the market. This is their traditional Trash Can Solenoid with a 1/4 lb per solenoid CNC machined off of the base of the solenoid. This both saves weight as well as...

  • Lightweight Fuel Solenoids (.156)

    These lightweight fuel solenoids are great for anyone who’s looking to save weight in any way possible. they are based on the I-S small body fuel solenoid and look great with CNC machined bottoms taken down to the bare minimum. This solenoid...

  • Lightweight Nitrous Solenoids – .120 Bottom Exit

    These lightweight nitrous solenoids are great for anyone who’s looking to save weight in any way possible. They look great with CNC machined bottoms taken down to the bare minimum. These also include TRUE .120 orifice making them a great...

  • Lightweight Nitrous Solenoids – .125 Bottom Exit

    These lightweight nitrous solenoids are great for anyone who’s looking to save weight in any way possible. They look great with CNC machined bottoms taken down to the bare minimum. These also include TRUE .125 orifice making them a great...

  • Low Amp Nitrous Solenoid Coil

    This is a replacement low amp nitrous solenoid coil for I-S .120 bottom (PN 19718) and/or .120 side exit (PN 19717) nitrous solenoids, it will also fit these common solenoids; NOS: 16045 and 16048R Edelbrock: 72001 and...

  • Nitrous Solenoid

    Nitrous Solenoid-Side In Bottom Out Solenoid (.120)

    I-S Side In/Bottom Out with a .120 base – This is their most commonly used nitrous oxide solenoid. They are used in all of the I-S conventional direct port systems. A single Bottom Exit Solenoid can free-flow 500 HP of nitrous! Induction...

  • Pinned Plunger Rebuild Kit

    Are you looking at the right nitrous plunger? Check out the I-S comparison page to see what kind you need! Nitrous Solenoid Plunger Info This is their PTFE pinned style plunger and service kit. It is good for both bottom exit and side exit nitrous...

  • Purge Kit

    The I-S purge kit insures a supply of fresh liquid nitrous at the solenoids for instant and repeatable nitrous injection. It is an integral part of any nitrous system! Purging bleeds both accumulated air and nitrous vapor from the supply lines that can...